973-694-2893 American Heart Association Training Site in Wayne New Jersey

Customer Service: 973-694-2893 • Wayne, NJ

ON-SITE RESPIRATOR TRAINING, N95 FIT TESTING & CERTIFICATION
OSHA MEDICAL CLEARANCE

Home / Group Fit Testing

Welcome to ShowMeCPR LLC Onsite Fit Testing Services. We provide quality, cost effective on-site respirator fit testing for all your employees that are required by OSHA regulations to wear a respirator while on the job. Professionally fitted, NIOSH-certified masks are a safety requirement meant to protect against breathing air contaminated by harmful vapors, fumes, and particles. OSHA’s Respiratory Protection Standard (29 CFR 1910.134 requires employees to be medically cleared and fit tested before wearing a respirator; our NJ registered Nurse (RN)/ NJ Paramedics reviews the employees’ medical evaluations. Our staff is here to help you complete all OSHA N95 mask fit testing requirements, provide respirator fit test kits, assist with OSHA reporting and paperwork requirements, and, ultimately, to help you protect your employees.

We service all of New Jersey, Eastern Pennsylvania, Western Connecticut and Hudson Valley of New York State & New York City/Long Island. If you are within 60 miles from Wayne NJ, we require a minimum of 25 people, if +60 miles from Wayne NJ we require a minimum of 40 people. Travel fees may apply, request a quote for your fit testing needs. (Under 25 can receive onsite fit testing, additional fees will apply)

For individual Fit Testing and Medical Clearance please go to our Fit Testing Appointment Page for date times.

Qualitative & Quantitative Fit Testing


Qualitative fit testing is the traditional pass/fail test that relies on the subject’s voluntary/involuntary response to challenge agents (i.e. taste, smell, irritation - Saccharin/Bitrex). Qualitative Fit Testing can be performed for individuals at our Wayne NJ location or onsite for large groups.

Quantitative fit testing uses a machine to numerically measure leakage into the facepiece. We test with a TSI PortaCount Pro+ Respirator Fit Tester 8038 which can fit test N95's, half face and full face pieces. Quantitative Fit Testing can be performed for individuals at our Wayne NJ location or onsite for large groups.



Cost-effective and highly efficient fit test clinics run at your location by our trained staff. There’s no longer a need to send your employees to costly urgent care providers or occupational health clinics; just choose the date and time and we’ll come to you!

A full range of OSHA Respiratory Compliance Program solutions designed to cut costs and improve safety.

Complete Professional Fit Testing Services supplies, including pre-clinic education materials, testing supplies, and fit test certification documentation. We fit test your employees with N-95/N-100 respirator (TB masks), half-face/full-face respirators, and do disposable dust mask fit tests as specified by current OSHA-accepted respirator fit test protocols.


We provide both Qualitative Fit Testing and/or Quantitative Fit Testing as well as the Medical Clearance & Respiratory Protection Training including documentation to satisfy OSHA requirements.



We Utilize OSHA Fit Testing Steps:

  • Inspect respirator
  • Don (putting on) respirator
  • User seal check
  • Fit Test exercises
  • Doff (taking off) respirator
  • Train worker on Respiratory Protection & limitations

Qualitative Fit Testing will include:

  • Pass/Fail Test
  • Uses sense of taste/smell or reaction to irritant to detect leaks § Does not measure amount of air leaking into face piece
  • Test subject detects leakage of test substance.
  • Mostly for half-mask respirators like N95 face masks
  • We will unitize the 4 methods accepted by OSHA:
  • Isoamyl Acetate- smells like bananas § Saccharin- tastes sweet
  • Bitrex- tastes bitter
  • Irritant Smoke- causes coughing

N95 Quantitative Fit Testing done via TSI PortaCount Pro+ Respirator N95 Fit Tester 8038

Your choice of respirator products—any brand, any type. All dusk mask fit tests, half mask respirator fit tests, and other respirator testing, regardless of product preference, are provided by technicians trained in OSHA fit testing protocols.

Flexible scheduling to accommodate multiple shifts and departments.

Full HIPPA compliance; confidentiality of protected employee medical information is ensured.

Specializing in MSA - Certified MSA Technician for Full Face Masks


COVID19 Fit Testing Pictures


ShowMeCPR LLC is helping frontline Nurses, CNA and staff keep save during the COVID-19 pandemic outbreak. Below are pictures of critical fit testing at a nursing home, taking the extra steps and providing education and fit testing to their employees.



Need Fit Testing at your facility? We will come out for 25 or more people. Request A Quote Today!


OSHA Medical Questionnaire & Check List


OSHA requires a respiratory questionnaire to be filled out by all who are undergoing a respirator fit test to make sure employees are healthy enough to use a respirator. The questionnaire will be reviewed by our NJ Registered Nurse prior to the test being conducted. The form must be filled out in advance of the fit test if it is being conducted onsite. Click here to download OSHA Form

OSHA provides a checklist for Proper Respiratory Use, Click to download checklist


Yearly Fit Testing


OSHA requires Fit Testing be conducted Annually or if change in respirator type, brand, size, weight loss (>25 pounds), facial surgery or dental changes.

Request Group Quote for On-site OSHA Respirator Fit Testing


2022 ShowMeCPR.com. ShowMeACLS.com All rights reserved.
AHA Disclaimer: The American Heart Association strongly promotes knowledge and proficiency in BLS, ACLS, and PALS and has developed instructional materials for this purpose. Use of these materials in an educational course does not represent course sponsorship by the American Heart Association. Any fees charged for such a course, except for a portion of fees needed for AHA materials, do not represent income to the Association.